vertex angle
英 [ˈvɜːteks ˈæŋɡl]
美 [ˈvɜːrteks ˈæŋɡl]
网络 頂角; 顶角; 顶点角
双语例句
- At the same time convert the angle of the polygon at that vertex into a straight angle. You just get improvements on the margin.
同时把该顶点处多角形的角转换成平角。你只能作点边边角角的改进。 - A New Method and the Calculation Result of Analytically Calculating the One-Loop Renormalized Vertex Angle in Proton Scattering
关于质子散射中单圈重整化顶角的解析计算新方法与计算结果 - Based on the3D data of vertex, edges and planes, which are obtained from the tri angle projection of a plane body, the calculation method of the plane body formation is hence worked out.
提出一种以从平面体三面投影中“提取”顶点、棱线和棱面三维信息为基础，得出平面体“构型”的计算方法。 - As in art, design a user spends lines, the design of a vertex angle spends Kok decorated it with the entire room trying, the revitalization of the indoor atmosphere.
如在壁面上设计一弧型铁花线条，顶角设计一铁花角饰，它与整个居室相映成趣，活跃了室内氛围。 - At the same time convert the angle of the polygon at that vertex into a straight angle.
哥特式穹顶的对角拱柱同时把该顶点处多角形的角转换成平角。 - Relationship among the inclination of a robot's working cone end to the axis, cone vertex angle of the working cone end and the leading angle a in the leading device is set up in this paper.
建立了机器人锥形工作端锥顶角和相对轴线倾角、导向装置导向角a之间的关系式。 - Classical solution of a cylindrical orthogonal anisotropic elastic wedge subjected to a concentrated couple at the vertex become infinite when the vertex angle satisfies certain definite relationships, this is a paradox.
圆柱型正交各向异性弹性楔体顶端受有集中力偶的经典解，当顶角满足一定关系时，其应力成为无穷大，这是个佯谬。 - Let α be a cone with vertex M and directrix c. We denote the integral of the vertex angle of x by ω_M ( c).
令α是一个以M为顶点、以c为准线的一个锥面，我们用ωM（c）表示α的顶点整角。 - In this paper, we establish some new important geometric inequalities involving the k-dimensional vertex angle of each simplex and the k-dimensional mixed vertex angle of two simplices.
本文证明了关于两个单形的k级混合顶点角与每个单形的k级顶点角之间的一些新的重要的几何不等式。 - According to definition and some characters of vertex chain code, transformation between vertex chain code and alterable included angle chain is discussed.
本文还从顶点链码的定义及性质出发，讨论了可变夹角链码和顶点链码的相互转换问题。 - In case of three boreholes inclination survey data, borehole vertex angle and azimuthal from three boreholes are all the same, determining the occurrence of rock mass structural plane can be by the way of vector product of two vectors.
来自3孔的3点测斜资料&钻孔顶角和方位角完全相同情况下，可以采用两个向量的向量积方法确定岩石结构面产状。 - In this paper, the thermodynamic theory of nucleation processing in V-shaped cone hole have been analysed and the effects of the vertex angle of V-shaped cone hole, he depth of V-shaped hole and contact angle on nucleation processing have been discussed.
本文对V型异质锥孔衬底上的成核及晶核生长过程进行了热力学计算，分析了锥孔的顶角、锥孔深度和润湿角对成核过程的影响。 - The author proposes a 3D triangular mesh simplification algorithm with the method of vertex culling, which is based on the rule of vector angle.
提出以顶点向量夹角为剔除准则，运用顶点去除方法进行网格简化的算法。 - The k-Dimensional Mixed Vertex Angle of Two Sim p lices
两个单形的k级混合顶点角 - A new re-triangulation method based on normalized minimum-vertex-distance was presented to avoid long and thin triangles, and it considered the vertex distance and the interior angle of triangle.
在局部三角化中考虑了三角形内角和顶点距离，采用规格化最小顶点距离法实现局部三角化，避免了狭长三角形出现。 - This paper improves on Dijkstra arithmetic in two aspects, one is graphics data's storage structure, another is search strategy of shortcut vertex, and advances a shortcut search arithmetic basing on Angle of Vector.
本文从图形数据的存储结构及最短路径顶点的搜索策略两个方面对Dijkstra算法进行了改进，提出了一种基于矢量角度的最短路径搜索算法。 - Design of the vertex angle of cone working end in robots
机器人锥形工作端锥顶角的设计 - In this paper, the concept of k dimensional vertex angle of simplex is given, a class of volume formulas of simplex are established, sine theorem of k dimensional vertex angle is derived and a geometric inequality about k dimensional vertex angle is obtained.
本文给出单形K维顶点角的概念，建立单形新的一类体积公式，导出单形K维顶点角的正弦定理，并获得关于单形K维顶点角的一个几何不等式。 - Develops a mathematical model. Obtains the jet path of a diffuser with different half cone vertex angles by numerical solution. Analyses the influence of cone vertex angle on jet, and recommends the desired cone vertex angle of 110 °~ 130 °.
建立了数学模型，通过数值求解得到了散流器在不同半锥顶角下的射流轨迹，分析了锥体顶角对射流的影响，建议锥体顶角为110°～130°。 - The reasonable ranges of the geometrical parameters are given by analyzing the influences of the vertex angle and cutting angle on impact force and penetration displacement.
通过分析棱柱杆的几何参数对撞击力和侵入位移的影响，给出了棱柱杆主要几何参数的合理范围。 - Troposphere vertex delay is osculation interrelation with angle of altitude;
对流层天顶时延同高度角密切相关； - The 'standard' massive flow silos designed with certain half vertex angle was only suitable for a little part of particulate solid.
指出在一定半顶角下设计的标准整体流料仓，只适用于很小一部分粉体物料。 - The conventional drilling borehole curves strongly, manifested as clockwise increase of the drill hole direction, vertex angle hanging-down. In the drilled 9 holes, only 4 of which are first class hole, 163m footage is reported as worthless.
由于岩层各向异性、软硬互层，常规施工钻孔自然弯曲强烈，表现为钻孔方位顺时针增大、顶角出现下垂，施工9个孔，一类孔仅4个，报废进尺163m。 - The half vertex angle was determined by particulate solid and hopper materials.
料斗半顶角由实际物料和料斗材料确定。 - Laminar Flon in Triangular Ducts of Arbitrary Vertex Angle
任意顶角三角形管道中的层流 - The results showed that, the cutting seam depth is used as vertex of the fall Angle, with the increased depth of the cut seam, the fall Angle gradually reduces.
模拟结果表明，以切缝深度作为垮落角顶点，随着切缝深度的增加，垮落角逐渐减小。 - The structural integral evaluation index includes vertex displacement time history and elastoplastic interlayer displacement Angle and so on. Component performance evaluation indicators include studying the development of the plastic area, damage degree, stress and strain components, etc.
结构整体评估指标包括结构顶点位移时程、弹塑性层间位移角等；构件性能评估指标包括研究塑性发展的区域、损伤程度，构件应力、应变等。 - Through these studies, draw the following conclusions: frequent occurred earthquake, partial reinforced block masonry frame structure vertex displacement and maximum drift angle than the infilled frame structures were significantly reduced.
通过以上研究，得出如下主要结论：多遇地震下，部分配筋砌体框架结构的顶点位移和最大层间位移角较框架填充墙结构均明显减小。